AOA CHROMIUM CARBIDE CLAD PLATE TECHNICAL INFORMATION
Cutting and Fabrication Service
- Plate is preferably cut with plasma arc. A 120 amp to 200 amp machine is sufficient to cut all thicknesses.
- All cutting should be from the mild steel side otherwise chromium and carbon will contaminate mild steel base and cause a brittle weld when attaching to components
- Plate can also be cut using arc air and abrasive disc
- All plate cut inhouse is on CNC plasma unit ensuring precision cutting
- Stud welding is accurately positioned by CNC location system
- Plate is rolled on CNC rolls
- Heavy press brake and fabrication services are provided
Recommended Minimum Bending Radius
Plate Thickness | Hard Facing Layer Inside | Hard Facing Layer Outside* |
4/5, 6/7, 6/6, 8/8 | 200 mm | 500 mm |
8/11 | 300 mm | 600 mm |
12/12 | 1000 mm | 1800 mm |
*Hard surface will open up as hardface is in tension and hardface chromium carbide has no elongation.
Bending radii are a guide only please consult AOA with your requirements.
